September 7, 2024
Description
Project: Goku Page Manga.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab basic Blue Transmission Distance: 0.5
PLA Elegoo Red Transmission Distance: 4
PLA BambuLab Basic White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to White
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to Black
At layer #16 (1.36mm) swap to Jade White for the rest.
Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo
How to print more than 4 colours with a single AMS: from 42 sec onwards in the video
License:
BY-NC
Dakiren
