Magnetic box for wet wipes - Three sizes

Don't like the plastic wrapping of your wet wipes package? Stressed by this thin plastic flap coming loose all over again?

Here you go - a handy box to store your wet wipes. Easy accessible with a sealing flap and easy refillable due to magnets!

 

Three sizes available - SMALL, MIDDLE and BIG

• Small → Inner dimensions 140 x 90 x 56mm.  → Print profile provided for A1 mini
• Middle → Inner dimensions 140 x 110 x 56mm.  → Please upload a profile for bigger BambuLab printers (I don't own one)
• Big  → Inner dimensions 195x 110 x 56mm.    → Please upload a profile for bigger BambuLab printers (I don't own one)

BOM : 

• 1x Pinted bottom part
• 1x printed top part
• 1x Printed flap
• 2x printed hinge
• 10x 6x3mm Neodym magnet
• ~31mm long piece of filament (1,75mm)
• …and some superglue

Instructions : 

1. Use a drop of superglue for each magnet (recommended!)
2. Cut a 31mm piece of filament
3. Push the filament through the hole in the flap, put both hinges to the ends
4. Firmly press the hinges with the flap into the rectangular holes of the case top

Note : 

• All parts should be printable without supports.
• I only printed and tested the small version. Printing the big version on your own responsibility.