Stained Glass Ghosts

The base image used to make this was made using AI image generation.

I used the Lithophane setting in Hueforge to make these.

This is printed in two parts. The two parts are glued back to back to make the final product.

Here are the specific colors with transmission distances that I used.

Please note that for some of the transmission distances I had to print test samples and got them visually as close as I could. They may not be 100% exact.

Please also note that Bambu Studio may tell you that there are floating regions in this model. I was able to print it with no issues with no supports.

Part 1 (Orange Plate):

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Hatchbox Black Transmission Distance: 0.2

Swap Instructions:
Start with Jade White
At layer #4 (0.28mm) swap to Yellow
At layer #13 (0.64mm) swap to Red
At layer #25 (1.12mm) swap to Black for the rest.

Part 2 (Purple Plate):

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Purple Transmission Distance: 6
PLA Hatchbox Black Transmission Distance: 0.2

Swap Instructions:
Start with Jade White
At layer #4 (0.28mm) swap to Purple
At layer #19 (0.88mm) swap to Black for the rest.

Settings in Bambu Studio

All settings are default except the ones specified below.

0.08mm Extra Fine

Quality:

Layer height - 0.04

Initial layer height - 0.16

Slice gap closing radius - 0

Strength:

Top shell layers - 0

Top shell thickness - 0

Bottom shell layers - 999

Sparse infill density - 100

Sparse infill pattern - Rectilinear

Detect narrow internal solid infill - False

Ensure vertical shell thickness - False

Speed:

Inner wall - 200 mm/s

Sparse infill - 150 mm/s

Internal solid infill - 150 mm/s

Overhang speed (in order) - 0 mm/s, 50 mm/s, 30 mm/s, 10 mm/s

Gap infill - 200 mm/s

Others:

Prime tower - False