Super Mario key hook 超级马里奥钥匙挂钩

2024.09.13 Update:  增加了定制标牌配置，可以定制自己的标牌，只需要定制的标牌尺寸在37.6*37.6*1.6mm以内，并用对应的夹具安装。Customized signage configuration has been added, allowing users to customize your own signage. The size of the customized signage needs to be within 37.6 * 37.6 * 1.6mm and installed using the corresponding fixtures.

 

安装步骤 Installation step：

将轴切断，Cut off the shaft。

 

将底座、蘑菇、无敌星、金币等，还有标签支架也装上Ø4×2强力磁铁，建议用强力胶水固定。（如果不用磁铁，也可以用双面胶粘。）。The base, mushroom, super star, gold coins, etc., and label brackets are also installed with Ø4×2 strong magnets, and it is recommended to use strong glue to fix. (If you don't use magnets, you can also use double-sided adhesive.)

按下图的步骤安装，Install according to the steps shown in the following figure:

如果在第1、2、4步插入轴时，零件转动有阻力不顺滑，则需要将轴的尺寸调小再重新打印。If there is resistance to the smooth rotation of the parts when inserting the axles in steps 1, 2, and 4, the size of the axles needs to be reduced before reprinting.

金币、蘑菇、无敌星可以切换，挂钩也可双换成磁吸的。Gold coin, mushroom, and super stars can be switched, and hooks can also be exchanged for magnetic ones.

Boost MeIF you like this model.