P1 Series Hydrometer Thermometer Magnetic Mount

I've printed hundreds of ABS part with P1P in a sub $50 enclosure tent with exhaust system without any issues. This a simple friction fit hydrometer/thermometer sits nicely on either top or bottom beam of P1 series, I found them to be quite accurate.

Print it in ABS as the P1S chamber can reach over 60c which is near PETG thermal deflection point. Definitely don't use PLA, because the clearance is very tight on the bottom beam. PLA will warp in P1S Chamber, any warping would interference with the gantry movement. Also print with 0.4 nozzle, any other sizes would have fitting issue.

Part List (US Amazon links)

Hydrometer/Thermometer x 1

6x2 mm magnets x 4 (two on each side)

Be sure use the magnets from the Amazon link above. Magnets from different brands are slightly different in actual size, even though they all listed as 6x2mm. Magnets from the link is actually 6x1.8mm, the model was created with that dimension.