September 13, 2024
Description
This Jack Skellington decoration showcases the Pumpkin King in his classic suit, standing tall against a spooky backdrop of a haunted house, full moon, and flying bats. Flanked by grinning jack-o'-lanterns, this monochromatic design captures the eerie yet charming essence of Jack, making it an eye-catching addition to any Halloween display.
The model is 100mm x 175mm in size.
Aimed for a "3D Look” with Jack`s deeper layers.
ALSO CHECK OUT:
Halloween - Pumpkin Bookmark set
Halloween - Pumpkin Sign/ Decoration
Halloween - Witches Bookmark set
You will get the best results using a 0.2 nozzle, but a 0.4 nozzle works great aswell. The published pictures are printed with a 0.4 nozzle.
This model allows printing with colour changes at layers, saving a lot of filament.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm !
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Gray
At layer #20 (1.68mm) swap to Charcoal
At layer #30 (2.48mm) swap to Ivory White for the rest.
After printing use a lighter/ torch, by quickly passing the printed parts you will get rid of the tiny stringing on these type of prints.
Print Profiles for AMS/ No AMS users available.
Further Halloween Theme Sets in the making.
Please Comment and Rate
A Follow is highly appreciated <3
License:
Standard Digital File License
GravityJD
