AN6 (-6 AN) PTFE hose separator clamp

I needed some clamps for the PTFE AN6 fuel lines of my car… I used Bambu Labs PC6-CF to print these and that's what is in the profile… also used a 0.6mm nozzle

Also included are standoffs in 8mm, 10mm and 12mm plus a little nut "washer" to make installation look neater

Designed to use M4 cap bolts

Please note… these are designed for PTFE AN6 and the clamps ID is 12.2mm (I measured my AN6 PTFE lines are 11.5mm OD) and might not be suitable for rubber AN6 hose..