September 14, 2024
Description
This is a triptych of bookmarks I made in Hueforge using the Color Aware feature. This is best printed with a .04mm layer height for the best gradients and details.
Project: Mushrooms v2 Right.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 146.86x441.01mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 1.9mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Kingroon Yellow Transmission Distance: 7
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA+ Esun Forest Green Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Anycubic Tropical Turquoise Transmission Distance: 3.6
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #2 (0.28mm) swap to Red
At layer #7 (0.48mm) swap to Orange
At layer #8 (0.52mm) swap to Yellow
At layer #9 (0.56mm) swap to Jade White
At layer #16 (0.84mm) swap to Black
At layer #17 (0.88mm) swap to Forest Green
At layer #19 (0.96mm) swap to BambuLab Green
At layer #23 (1.12mm) swap to Yellow
At layer #25 (1.2mm) swap to Jade White
At layer #30 (1.4mm) swap to Black
At layer #32 (1.48mm) swap to Tropical Turquoise
At layer #36 (1.64mm) swap to Jade White for the rest.
License:
BY-NC-SA
Bakermakes
