Another Day in Paridise (hueforge)

Scenic Wall Art “Another Day in Paradise” (hueforge) This is a 5 color print. If you use the above print profile, it's sliced so the bottom layers are thicker to save time (saves some time). if you are setting up on a different printer use the information below to set the layers after you slice. Thanks.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Sky Blue Transmission Distance: 4
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Sky Blue
At layer #13 (1.2mm) swap to Orange
At layer #18 (1.6mm) swap to Red
At layer #22 (1.92mm) swap to White for the rest.