Christmas Litophane ornament

Hi!

I created these Christmas ornaments with Santa Claus lithophanes, using the bulb found at the following link as a reference:

https://www.amazon.it/dp/B01FF07XFE?th=1&linkCode=ll1&tag=gabriele0d48-21&linkId=2096f797f425322269c6bd544fb22b0d&language=it_IT&ref_=as_li_ss_tl 

If the link doesn't work, you can easily find them on Amazon by searching for "LED for balloons."

Below is the image of the bulb I used, to be used as a reference for purchase (they are really cheap!)

The bulb has a diameter of 11 mm, but it comes with a small transparent silicone ring that brings it to a diameter of 13 mm.

This simply fits into the hole of the Christmas ornament and, thanks to the silicone ring, it locks into place.

To turn it on and off, simply rotate the bulb to the right and left.

I've also added some profiles with a 15 mm diameter hole as I've seen that there are bulbs with this diameter as well, or simply to facilitate the work for those who want to fill them with an LED strip.

Attached are all the RAW files, but I know it can be challenging to edit them on your own.

So, if you need an ornament with a particular hole diameter, feel free to go to my profile and send me a message (or you can comment below);

I'll be happy to create the print profile for you!

Merry Christmas!