泡面计时器（陀飞轮版） Instant noodle timer tourbillon

This is a noodle timer device that utilizes the gravitational potential energy of noodles to generate kinetic energy for operation. At the end of three minutes, the timing mechanism of the device activates, producing a bell sound to alert the user that the noodles are ready.

Children should use this under adult supervision and maintain a safe distance of at least 50 centimeters from the body!!!

Note: This model is quite complex and requires strong manual skills.

Please strictly adhere to the 3MF parameters and bed leveling for printing, using PETG material. Also, prepare a 2-2.1mm hole enlarger (hand drill + drill bit) to ensure smooth rotation of gears on the shaft.

Please carefully refer to the assembly instructions when assembling. Install the hardware components in the corresponding positions according to the specifications. Thank you for your attention!

Bill of Materials (non-printed parts)

M2*6 Self Tapping Screw 6pcs
M2*8 Self Tapping Screw 40pcs
M2*12 Self Tapping Screw 19pcs
D2*L6 Dowel Pin (Knurled) 6pcs
D2*L12 Dowel Pin (Knurled) 2pcs
D2*L16 Dowel Pin (Knurled) 3pcs
D2*L20 Dowel Pin (Knurled) 9pcs
D2*L25 Dowel Pin (Knurled) 5pcs
D2*L30 Dowel Pin (Knurled) 2pcs

D2*L50 Dowel Pin (Knurled) 3pcs
D3*L6 Dowel Pin (Knurled) 10pcs
D5*h3 Magnet 13pcs

D10*h3 Magnet 2pcs

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

这是一台泡面计时装置，使用泡面重力势能转换为装置运行的动能，在三分钟结束的时候，装置报时机构工作，发出铃声，提醒用户泡面好了~
小朋友请在大人监督下使用，务必距离人体50厘米以上安全距离！！！
提示：此款模型较为复杂，需要较强的动手能力
请严格按照3MF参数和摆盘打印，必须使用PETG材料，并且准备好2-2.1MM扩孔器（手钻+钻头），保证齿轮能在轴上流畅转动。
组装时请仔细参照装配说明，按照规格指示安装对应位置五金件，感谢关注~

物料如下：M直径*长度/数量

M2*6 自攻丝 6pcs
M2*8 自攻丝 40pcs
M2*12 自攻丝 19pcs
D2*L6 金属圆柱销（滚花） 6pcs
D2*L12 金属圆柱销（滚花） 2pcs
D2*L16 金属圆柱销（滚花） 3pcs
D2*L20 金属圆柱销（滚花） 9pcs
D2*L25 金属圆柱销（滚花） 5pcs
D2*L30 金属圆柱销（滚花） 2pcs
D2*L50 金属圆柱销（滚花） 3pcs
D3*L6 内六角自攻丝 10pcs
D5*h3 钕磁铁 13pcs
D10*h3 钕磁铁 2pcs

2.1MM扩孔器（手钻+钻头）、内六角扳手

----------------------------------------------------------

组装教程已上传视频号，搜索甄大大

QQ群：6699770