Articulated Goofy Octopus

------------------------------------------------------

There is a new, improved version of this model available here: https://makerworld.com/en/models/1297536-articulated-octopus-new-version#profileId-1329179 
 

------------------------------------------------------
🐙
Articulated Goofy Octopus.
Printed and assembled model is approximately 30cm in diameter.
Fits on A1 mini plate.

Eyes print separately to avoid wasteful color swaps.
Tentacles are compatible with this non-goofy octopus version as well.
 

NOTE: The default profile prints a 1-layer grid on the bottom. This grid is very easy to remove and improves print reliability when printing the small segments in the tentacles. NO GRID version: https://makerworld.com/en/models/1188017-osha-the-octopus-2-color-no-ams-needed#profileId-1199335
 

After printing
- Please wait for the plate to cool down before removing the print as it consists of some small, delicate parts.

- Plug eyes into the head. They should fit tightly, but glue might be necessary depending on your filament choice and printer settings.
- Plug the tentacles in the head. It was designed to be a press fit, but, again, glue might be necessary depending on your filament choice and printer settings.