September 17, 2024
Description
Project: fredyy krueger fuego.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 230x230mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA smatfil rojo Transmission Distance: 2.3
PLA smatfil amarillo Transmission Distance: 5.8
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to rojo
At layer #12 (1.04mm) swap to amarillo
At layer #19 (1.6mm) swap to White for the rest.
License:
Standard Digital File License
Kheev_Fpv
