6.35mm to 1.8mm adapter drill bit---转接钻头

Due to the shrinkage of the printed hole when using a 1.75mm consumable wire as the pivot, the consumable wire cannot be inserted

After drilling with a 1.8mm drill bit, the consumable wire can be inserted precisely

So we designed a 6.35mm to 1.8mm adapter and used glue to bond it with the 1.8mm drill bit, so that the electric screwdriver can also drill holes

由于在使用1.75mm的耗材丝作为转轴时，打印出来的孔会缩小，导致耗材丝插不进去

使用1.8mm钻头钻孔后，耗材丝正好可以插进去

所以设计6.35mm转1.8mm转接头，和1.8mm钻头使用胶水粘接，使电动螺丝刀也可以钻孔