September 18, 2024
Description
Project: joker morados.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 187.5x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA smartfil morado Transmission Distance: 1.6
PLA smatfil amarillo Transmission Distance: 5.8
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to morado
At layer #10 (0.88mm) swap to amarillo
At layer #15 (1.28mm) swap to White for the rest.
License:
BY
Kheev_Fpv
