September 19, 2024
Description
Jurassic Park
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133,40x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Jade White for the rest.
If you are interested in the black frame that clips onto this hueforge, it is a standalone print. See this link: https://makerworld.com/en/models/648613#profileId-574933
License:
Standard Digital File License
JoDau
