Nezuko - Demon Slayer Poster / Picture

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

MembershipC3D Commercial Membership - Authorized Merchant

 

This poster of Nezuko showcases her playful side with a unique mask in hand. The soft pinks and greys make her stand out, giving a fresh take on her usual look. Perfect for anyone who loves Demon Slayer and wants to add a fun, creative vibe to their collection! Comes framed, ready to be displayed.

 

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA Jayo Gray Transmission Distance: 2.1 / Amazon
PLA KINGROON Skin Transmission Distance: 5.3 / Amazon
PLA Jayo Matte White Transmission Distance: 4.6 / Amazon
PLA BambuLab Basic Pink Transmission Distance: 6.4

Color Pallete:

 

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #17 (1.44mm) swap to Skin
At layer #21 (1.76mm) swap to White
At layer #26 (2.16mm) swap to Basic Pink for the rest.

 

Boost MeIf you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛