September 21, 2024
Description
Settings with ironing worked down to perfection to create stunningly smooth surfaces and overall prints that almost look like they were cast from PLA instead of printed. There are two print profiles: Textured and Smooth. Textured uses the adhesion of a textured plate to create a standard first layer. Since the smooth plate is notoriously horrible with bed adhesion if not maintained properly, I made a first layer with the Hilbert Curve pattern to minimize travel moves, since there's a chance of bed adhesion loss every time the nozzle has to stop and re-extrude in a different place. This method also makes the nozzle lines on the smooth plate completely invisible. Both profiles work with both plates if the build plate is maintained/glued properly, but they are optimized for quality and minimal print time for their respective plates.
It's only 20-30 minutes out of your day and 2 grams of filament off your spool, so give it a try!
9/23/24: Apparently, most of you are not having the smooth plate bed adhesion issues that I did when I created my presets, so I changed the print profile names accordingly to emphasize the former “textured plate” profile, which is now universal. The smooth plate profile is still up, but it is for those of you who do not use alcohol or glue to maintain your build plates and need a way to fix your bed adhesion.
If you like this project, feel free to check out my other refined print presets:
License:
Standard Digital File License
MoonTiger3D
