November 15, 2023
Description
Â
Hello guys, here's my new spool dryer to attach to my previously created bamboo dresser. This new add-on will allow us to store the external filament spool in a watertight container that has its filter with drying beads.
I printed everything in PETG and used the following specifications:
However, I recommend printing everything with a 0.6 mm nozzle and a layer height of 0.3 mm.
In the specific print of the main body, you'll notice that the pieces have 4 protrusions inside them. Please add supports to them so that there are no vibrations during the printing of the side walls.
I also recommend using a 25% infill for the printing of the rollers
At normal speed, the print should not exceed 24 hours, but you can always increase the speed and you'll use approximately 800 grams of material.
Among the files, there's also a version without attachments to the dresser module. Perhaps you prefer to simply place it near the printer.
I'm also adding the files for the print bed support, both for 3 and 4 beds. This is because we need to move the beds to the right, while now if you've already printed the dresser, they are on the left.
Â
You can find the assembly video for the box here:
Â
Here are the links for the materials used:
Epoxy adhesive and, if desired, silicone sealant to make the box watertight.
Rubber window gasket:Â
US Link : http://tinyurl.com/mr232v46
EU LInk: https://www.amazon.it/gp/product/B0BKLSW1DG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Magnets:
US LInk: http://tinyurl.com/2kze5y5s
EU Link: https://www.amazon.it/gp/product/B07WSBTYV2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Ball bearings: 8 x 22 x 7 mm 608Z
US LInk: http://tinyurl.com/4a2cbxmr
I wish you a happy print and look forward to your comments and feedback!
License:
BY-NC
emazzarol
