September 23, 2024
Description
Halloween se acerca y esta imagen nos anima a ambientar un poco nuestra casa. Ha sido creada con Hueforge usando 4 colores en la mezcla (negro, verde, gris y blanco).
Espero que os guste!
Instrucciones:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x113.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sakata 870 Rojo Transmission Distance: 5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Rojo
At layer #9 (0.8mm) swap to Blue Gray
At layer #14 (1.2mm) swap to White for the rest.
License:
Standard Digital File License
jorge100a
