Rack Mount Enclosure for DMXKing eDMX4 PRO DIN

Need a eDMX Pro on a budget? 3D print your own enclosure and convert a eDMX4 Pro Din.

1. Print the Cover and Base
2. Print either the Fascade or Fascade_Flat. This is not optional - in addition to labeling it, it adds reinforcement to the front by changing the orientation of layer lines.
   • Fascade - Has a raised logo, works on all printers.
   • Fascade Flat - For MMU / AMS multi material printers (shown in picture)
3. Glue your chosen Fascade to the Base
4. Install XLR connectors with M4 screws
5. Install power jack through hole on Cover
6. Install the eDMX Pro Din with M3x5 or 4-40 machine screws
7. Assemble with M3x5 or 4-40 machine screws