Dabi - Past Never Dies

Hueforge of the iconic moment Dabi reminds us that the past persists. I usually use exclusively Bambu for this and Polymaker Cold White, but it should work fine with a mix of either.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 145.98x230mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Bambu Basic Purple Transmission Distance: 1.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #21 (1.04mm) swap to Purple
At layer #36 (1.64mm) swap to Jade White
At layer #40 (1.8mm) swap to Cold White for the rest.