Meet “Leggy”, the ideal bowl for your Halloween decoration.
You can use it as a bowl to hold candy or snacks at your Halloween party, as a holder for paper clips on your desk (by reducing the size) or simply as a cute decoration for your home.
You can easily print it without supports, and according to your printer and equipment you can choose:
AMS version, to print in multicolour without any post-processing. just separate the model by parts and assign the color you prefer to each one. The eyes are completely white so you can choose his expression by painting them with your slicer like this
NO AMS version, with separated body and eyes so you can print it with any single nozzle printer and/or save material and time. You will only need a little glue to put everything together. You can paint the pupils by hand or make a filament change at the height you like.
Printing recommendations:
Fuzzy sking makes ALL the difference, make sure you activate it in your slicer and verify that it is applied only to the body for best results.
If you reduce the size to 65% or less: you must add an adhesion helper, because the legs will be very thin and you will need the best grip to the surface. If you have any problems with Brim you can try using Raft in your slicer.
Recommended Print Settings
Material: PLA / PETG
Layer height: 0.16mm or 0,20 mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 10-12%
Perimeters: 2
Supports: no
this is one member of my original "HomePals" collection that you can see here:
MEAF designs
