Toga Himiko ALL props for Cosplay

all the following models are included

Scarf (+separate Teeth)

Scarfbottle

Hipbottle (Reservoir for blood)

Hipbox (Vial Box)

Thighbox (for throwing Knifes)

Throwing Knifes

normal sized Knife

The Props are scaled for a 1,68m tall person. The 3D models should already be optimally arranged to print. Some parts need support.

I printed the Scarf in TPU with 2 walls, 0% infill, no first layer and lightning support, so it stays flexibel. It won't come out super pretty, but it will be covered with fabric anyway. The Fabric was glued on the 3d print with spray on contact cement (for example https://cosplayshop.be/en/product/contact-glue-spray-can/) and the teeth i glued on with superglue on the fabric.

The Scarfbottles are designed functional. so you can slide them in and out. The holes for the tubes are 6mm wide. I needed about 4,5m in total. To glue the tubes i recommend silicone glue (super glue or hotglue didn't work for me). I used loolifl 688

For the Hipparts you need an 3cm elastic band. The Vial boxes are also functional, so you can move them.

For the bottles on the back, I made two designs. One with 3 holes or with one hole.

The Thighboxes for the Knifes are also functional, so you can pull the knifes out and slide them back in

The Knifes are split into handle and blade, so they can be easier post processed and painted.

Togas Mask was already uploaded here https://makerworld.com/en/models/658791

If there are any problems or improvements that can be made just let me know.