Sunlu S4 door handle

I designed some handles to make it easier to open the upper doors of the Sunlu S4 dryer.

To make them more pleasing to the eye I thought of adding the Sunlu logo on the upper face, if you want to print them in an anonymous version choose to print the version without the logo.

For assembly you will need the following elements:

• nr.4 threaded inserts M3xØ4,6x5,7mm or alternatively you can use the inserts that you find on maker's supply M3xØ5x4mm code AB012
• nr.4 screws M3x20mm code AA061 or alternatively nr.4 screws M3x16mm code AA060
• nr.4 M3 flat washers cod. AC004

Installation:

insert the button into its housing and push it outwards until it stops.

Holding it still in this position, rest the handle on the lid of the dryer, centering the two holes on the two fittings on the lid.

Screw the screws from the inside, passing them through the hole of the fittings.