霸王龙骨架250% Reinforced Tyrannosaurus Rex Skeleton

这是Makerbot的霸王龙骨架的改编版本。
我将它放大到250%，这是拓竹能打印的最大的尺寸了。
整体长约：140cm/55in。
高：60cm/24in。
大约需要2.6kg耗材。

除了进行放大250%。我还进行以下调整：
原版尺寸放大之后下颚固定在上颚会很松。我将它调整了。
盆骨的4个链接扣也会变松。我将它进行放大。
底座进行了拆分。

第一次我用PLA肤色材质打印。头部大约重1kg。太重了。如图所示。他无法站起来。导致中间连接处被压断！我正在尝试用哑光的PETG材质重新打印。目前还在打印中。后续我会继续调整这个模型！

 

This is an adaptation of the Makerbot's Tyrannosaurus Rex skeleton.
I scaled it up to 250%, which is the largest size that Tuozhu can print.
Overall length: 140cm/55in.
Height: 60cm/24in.
About 2.6kg of filament is required.

In addition to scaling it up 250%. I also made the following adjustments:
The original size is scaled up, and the lower jaw is fixed to the upper jaw loosely. I adjusted it.
The 4 links of the pelvis will also become loose. I scaled it up.
The base is split.

The first time I printed it with PLA skin color material. The head weighs about 1kg. It's too heavy. As shown in the picture. He can't stand up. The middle connection is broken! I am trying to reprint it with matte PETG material. It's still printing. I will continue to adjust this model later!

为我助力Thank you!