Dan da Dan - First Encounter Hueforge

Dan da Dan - First Encounter movie poster. The Burnt Titanium from Flashforge provides a nice effect but isn't necessary. This can be replaced with any suitable colour. I particularly like Bambu Labs Blue Grey as a replacement here.

You may print at higher layer heights below the Min Depth of 1mm

The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA Flashforge Burnt Titanium Transmission Distance: 4

PLA Bambu Basic Bronze Transmission Distance: 0.7

PLA Bambu Metal Copper Brown Transmission Distance: 0.5

PLA Bambu Basic Gold Transmission Distance: 2.8

PLA Bambu Metal Iridium Gold Transmission Distance: 1

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 7 unique filaments

Swap Instructions:

Start with Black

At layer #26 (1.24mm) swap to Burnt Titanium

At layer #31 (1.44mm) swap to Bronze

At layer #33 (1.52mm) swap to Copper Brown

At layer #36 (1.64mm) swap to Gold

At layer #40 (1.8mm) swap to Iridium Gold

At layer #41 (1.84mm) swap to Jade White for the rest.