Modular wrench holder with labels and magnets

This is a remix of theracecarshop's modular wrench system.

Notable modifications:

Added provisions for 8mmx3mm magnets (it's what I had on hand), both to hold the wrenches, and to hold the holder to the toolbox (you don't need them in every spot, but you have the option to populate whatever you need to for your situation). These magnets are friction fit, they press in very firmly and should not require glue, but you can apply some if you find they are loose, not all printers, and not all magnets, are the same.

Added a label system which just friction fits in, you can apply some glue if you want to make it permanent but it should not be necessary if your machine is properly tuned. The labels are a bit bleeded and muddy, but still readable, could be made better if you use a 0.2 nozzle for these labels.

And lastly, I just made a few changes to make the printability better without the need for supports.

I printed with PETG, but it would work with PLA if you're using them in a climate controlled environment.


Last note, when making the labels, I have included all the labels that I needed for my set, but I have left the ability to make custom labels, there is one label on it's own plate, this is the one I intended for modification, simply center the model, then in the object view, select the text object and modify the text to your need, then again center just the text layer, this will center it back to the label plate. There are also instructions inside the model.