October 2, 2024
Description
This is my secon fearsome duck. This time i choosed a design thats a bit darker and more demonic. The hughe horns give the duck a special feeling and the face of the pumpkin is more demonic. I hope you will have as much fun with this like with my first creation.
A singlecolor version is also availabe, ill upload it tomorrow. The print settings are tested and YES you can ignore the overhang warnings. It was my absolute intention to print the duck without any supports this time! The bottom of the beak is the only point where i had s litle problems with slightly hanging overhangs but i also print in “generic profile” with no additional calibration to have it done as convenient as possible. The small hangings there were easy to fix if you also suffer from them.
Depending on the material you can sand them down or use a lighter, like i did. One brave touch with the finger onto the hot filament with a simple push and its ok. If you want the duck flawless you can of course activate the supports.
IMPORTANT
If you scale up the model, thats absolutely fine, but then you will need to use supports, i think. I´ve not testet it but i think i´ve the already put in the maximum scale for supportless printing!
Hi there and thank you for considering my model. I had much fun creating this and more while painting it! Unfortunately im not really good at it, so this model consumes a lot of poop. I would suggest you print more than one at once. I printed for the first batch 2 pieces, you see here. One needed around 14 hours, 2 were 16h, so just 2 hours more for a complete duck more. A third would have been just one and a half hour more. I think a complete bed would be also faster. The Problem is that i hdad 188grams of poop which i think is quit a lot for printing only one at once.
But there´s another thing i want you to consider…
I am actually in need of a new printer for my projects, so a bit support would be nice. You can download and print this model, this would already be enough, your like and a good rating for the print profile would also be cool! I do not want to take money for my designs, i have problems paying for designs. I needed 4 months to decide im ready to pay for my cinderwing tribe membership, also some weeks to buy the gift packages from Kaizen3D that cost 7€ i think. I do not want you to pay for my models cause this should be fun here. I also will not include a link where you could pay me or something like this.
I think that when it´s a problem for me to pay, you shouldn´t even bother with such things when it comes to my models!
If you want to support my else you can support me with a follow and some likes on Tik Tok where i do daily content in german and sometimes also in english. Just talk to me if you have questions, suggestions, offers or anything else! I´ll be there!
…also available as a keychain Version - just take look here -
… i promised that i will provide a short Story to tell your kids as a free download when Amuly reaches 100 Likes, 100 Downloads and 100 Prints! It already has 101 Likes, 157 Downloads but only 49 prints at the moment… so we are nearly there! Im way better in inventing Stories than in modelling i was ever told. So if we reach this 51 makes that are left, i will write a story to share with your kids. It will be short enough as a bedtime story but good enough to make a movie out of it… i hope ;-)
License:
Standard Digital File License
15,657
Frank_druckt_3D_auf_TikTok
