Balisong (cyberpunk style with Arasaka logo)

This is a Balisong for practice.

The design is close to the cyberpunk style, so the Arasaka logo is added.

I believe many of you have printed the first version, and I have received many feedback.

Here are three improvements:

1. Added a lock at the end of the handle.
2. Removed the counterweight hole at the end that is difficult to install.

3. Removed the screw hole for the locating pin and used a locating pin integrated with the handle to reduce the need for hardware.

The current version retains the installation position of the blade counterweight block, of course, the feel is good without the counterweight block installed.

The handle shaft here uses two M4x12 screw, and the blade counterweight is an M4x32 copper rod.

Note: When inserting the counterweight copper rod, you can use a vise to force it in, but it may cause irreversible tensile deformation of the material. It is best to soften the material with boiling water or a hair dryer, so that it will be easier to insert.

The style with 6 love hearts printed on the handle is customized for a friend and is included in the print configuration.