Marquise de Cat Insert (RBGS)

Marquise de Cat module for the Root Board Game System
Please see my original upload for RBGS to see how it works.

Like all the faction inserts, comes in two parts, including a removable tray which holds the various faction pieces and the base holding any faction cards. The tray slots into the base along the long side and both parts can be printed in the upright orientation, support free.

Tray versions (added 10/11/2024)

This module comes with two tray versions. The original tray accommodates meeples with a thickness just shy of 9mm which was perfect for my own copy. However, if your meeples are slightly thicker, the alternative tray layout is more forgiving. The rectanglular arrangement has 4 of the meeples facing the front of the tray with the remaining 21 facing the sides of the tray for better use of space.

(updated 16/12/2024) Added an additional version of the tray (chonk) using the alternative layout but with more room for even thicker meeples. In a few copies it seems meeples can be closer to 10mm than 9mm. This tray aims to accommodate an average thickness of 9.6mm by extending the channel lengths and also reducing the separating wall thickness. This does compromise the strength a little but I imagine most people will not need to use this version.

What Can It Hold?

Tray

• 25 cat meeples
• 9 circular tokens (8 wood, 1 keep)
• 19 square tokens (18 buildings, 1 victory point marker)

Base

• 1 Board Setup Example card
• 4 Overview cards

Accounts for sleeved card thickness.