MAX Photobox + Turntable

Introducing the MAX Photobox + Turntable, designed specifically for capturing stunning images of small to medium-sized objects! This photo box pushes the extreme printable bed boundaries of a Bambu 3D printer thus allowing you to photograph much larger items than ever before, setting it apart from conventional photo boxes.

With a end to end design to maximize the entire printable bed surface area of the Bambu Lab printer, this photo box offers an extremely spacious interior that accommodates a variety of subjects, from intricate collectibles to more substantial pieces. The seamless rotating turntable enables a smooth 360-degree view, ensuring every angle is perfectly showcased and simplifying your photography process. The design is both functional and aesthetically pleasing, with smooth edges and an ergonomic layout. Ideal for product photography, collectibles, or artistic displays

Unlock new creative possibilities and capture your objects in a whole new light with this MAX Photobox—where there is finally a place for larger size objects!

Disclaimer: Cute figurines by SuddenlyCute3D from Cults3D

ATTENTION: As this photo box pushes the max boundaries of your Bambu 3D Printer so you will NEED TO select the CORRECT PRINT PROFILE ACCORDING TO YOUR PRINTER. This is very important.

Your print will very likely fail if you don't use my print profile and the correct print profile according to the 3d printer you have because many tweaks have been made to the print profile to ensure there are minimal scarring while printing the tall walls.

Some scarring might still occur at the very top of the walls (if your printer is out of alignment) but it will not affect usage and the print profile settings have been optimized to the best possible settings.

You can choose the Marked Turntable if you want the turn table to be marked for 0 / 45 / 90 / 135 / 180 / 225 / 270 / 315 / 360 degrees.

Step 1:

Please ensure the your print bed is clean and free of dirt and dust before you start the print, i would highly recommend you apply glue to the entire bed to prevent the side from wrapping and lifting.

Step 2:

Please make sure you place your PEI Sheet as proper and align to the bed build plate as possible. This step is crucial.

Ensure that the first layer of outline around the print bed, the print head goes around the bed, it does not go / print outside the bed area as this is pushing to the extreme corners .

Step 3:

Check and make sure the 1st layer is laid properly. If there are any scuff or damage on the 1st layer, please stop the printer and clean your PEI sheet then reprint it. This step is crucial.

Lastly check and ensure your printer cable will not collide when it printed to the max height of the printer.

That's all for the preparation.