Star Wars Halloween Keychain Skeleton Fan art

Set of 5 different Halloween characters as keychains, fan art

If you don’t have a multi-color printer like I don’t, you just need to set a pause at layer 11 when slicing this file. When the printer stops at layer 11, change the filament to white.

Start with black, then switch to white.

-I recommend setting your printer to a slow speed (up to 100 mm/s) to avoid messing up the small details.
 

-I’ve printed all my designs in both PLA and PETG, but I recommend PETG. If you leave your keys in a hot car, you don’t want your keychain to deform from the heat, which could happen with PLA.
 

-Set the infill to 100% if you plan to use the keychain in real-life conditions. The keychain will be under a lot of stress in a bag or pocket, so it needs to be strong to avoid breaking.

All designs shared here are created for hobby purposes only. I do not sell these designs, nor do I grant anyone the license to sell them. These designs are provided for free as a fan art for personal, non-commercial use only.

Enjoy!