November 19, 2023
Description
I created ornaments with family photos (lithophane) that attach to a light chain. I planned to add a few to the light chain each year.
I also created a second model so that the ornaments could be used on their own without the light chain. A 35mm or 38mm diameter led tea light candle will provide the light for the ornament.
!! I haven't had a chance to print the candle version yet. I cannot guarantee the quality of the model. I will try to provide photos or improvements as soon as possible (as soon as I am released from the hospital).
https://lithophanemaker.com/Lithophane%20Tag.html
The ornament itself is printed without supports. Since the lithophane is printed in portrait, you will have to secure it with supports. The lithophane has a diameter of 60mm, but it is better to use 59,6mm values.
Ornaments:
Litophane:
Ornament for light chain | First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force
Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the second lithophane into the groove on the outside of the ornament Step 3: Insert the light chain bulb into the hole in the ornament. Place the fuse on the light chain wire and insert it into the hole. Pull the light chain back a little. |
First, insert the lithophane inside the ornament. Insert perpendicularly - the ornament will spread a little - use a little force
Step 1: Insert the lithophane inside the ornament into the groove Step 2: Insert the hook holder from the inside Step 3: Insert the hook Step 4: Light and insert the iced tea light Step 5: Insert the second lithophane into the groove on the outside of the ornament | |
Circular Lithophane Maker is used to create lithophane https://lithophanemaker.com/Lithophane%20Tag.htm For greater lithophane strength, set at least a 2mm frame. Insert a photo and set values similar to the picture... Litophane is printed vertically
|
License:
BY-SA
rostap
