Hueforge Game Poster - Sonic The Hedgehog -

Sonic The hedgehog

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 136.8x200mm in size

Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA Kexcelled Sky Blue Transmission Distance: 2.6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 9 unique filaments

Swap Instructions:
Start with Black
At layer #14 (1.20mm) swap to Blue
At layer #19 (1.60mm) swap to Beige
At layer #20 (1.68mm) swap to Red
At layer #23 (1.92mm) swap to Orange
At layer #24 (2.0mm) swap to Yellow
At layer #28 (2.32mm) swap to BambuLab Green
At layer #29 (2.40mm) swap to Sky Blue
At layer #31 (2.56mm) swap to Jade White for the rest.

*Two optional frames possible (use the one for 140mm X 200mm)

- One with the hueforge inserted from the front without losing the outline border (but the border frame seems smaller)
https://makerworld.com/en/models/689118#profileId-617795

- The second with the hueforge inserted from the back with a loss of less than 1mm on all sides of the image (border a little bigger than the first)
https://makerworld.com/en/models/689107#profileId-617786