Marvin the Martian - MMU

MMU version of Marvin the Martian

Marvin the Martian is an extraterrestrial character from Warner Bros.' Looney Tunes and Merrie Melodies cartoons.

The model, as presented is 101mm tall.

This MMU model was derived from my non-MMU model (reworked for a clean MMU print).

Enjoy!

Print instructions

Important: I used seven colors for this print

I've included a Prusa Slicer 3MF file that I used for this print.  

To get the seven colors:

   -filament swap after the red finishes (47.4mm layer) and swap in the gold

   -filament swap after the silver finishes (60.2mm layer) and swap in the yellow

Individual STL parts are also included for other slicers. 

Extra note: I used the PrusaSlicer .2mm speed defaults for my MK4/MMU3, except for the following changes:

  1 - I used three walls for strength due to many thin sections.

  2 - I used organic supports and set the overhang parameter to 29deg.

Be sure to check/set the purge amounts for the colors based on your filament brand.  I was able to use the PrusaSlicer defaults without issue.