Raspberry Pi 5 I2C Display mount

This is a mount for 5 I2C displays which are connected to the raspberry pi 5's 1U below. I noticed that some of the dimensions of the PCB boards varied so some minor fitment may be required but the mount is designed for you to slide the bottom of the display in and pivot into the mount and press on the back of the PCB board to snap it in. Once all the displays are installed, you will need M2 screws, M2 standoffs and the decorative backing stl to completely secure the boards into the mount. If you don't plan on ever touching the displays or jumper wires then you might not need to screw the display into the mount. If you have any questions leave a comment below or message me!

Compatible Displays: 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306