Arduino Uno Case w/ Breadboard Slot

This is a remix of ItzAsila's remix of the Arduino Case by 3DP. I've added two logo versions for the lid, one with and one without text. Also, I've added some screw spacers, so you can use 8mm screws to mount the Arduino Uno.

Coloring The Logo

Select the lid, go into paint mode and use the fill tool. It should detect the logo outlines.

Print Settings

• .2mm layer height
• Infill 25%+

Assembly Hardware

• 4 M3 x 12mm screws for the bottom and top case
• 6 M3 x 16mm screws for the hinges
• 3 M3 x 5mm (or 8mm with the spacers) screws for mounting the Arduino

Inserting the breadboard is a tight fit. It could be that you need to snip off the nubs.