Sunset Shaolin - Hueforge

Comes in two sizes, do not re-scale in your slicer.

This print uses 5 different colors and they're changed at layer height.

Print Instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA PolyTerra Charcoal Black Transmission Distance: 0.3
• PLA PolyTerra Earth Brown Transmission Distance: 0.3
• PLA PolyTerra Pastel Watermelon Transmission Distance: 1.5
• PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
• PLA Bambulab Basic White Transmission Distance: 11

Swap Instructions:

• Charcoal Black until layer #6 at 0.56mm
• Earth Brown until layer #7 at 0.64mm
• Pastel Watermelon until layer #10 at 0.88mm
• Savannah Yellow until layer #25 at 2.08mm
• Bambulab Basic White for the rest.