TD-1 Self-Source

This is the current files for the TD-1 design. If you wish to self-source and build one of these, you can access all the files needed through my Patreon. https://patreon.com/AJAX_3D

EDIT 1/4/2025:

Release version 1.5. Changes include:

• Changed the sensor mount height to 11.8 to correct some issues some have had with button not triggering correctly.
• Added more clearance for solder joints where they rest against printed parts.

EDIT 7/17/2024:

Changed the following:

• Changed the geometry of the filament paths to allow for more tolerance in non-critical areas.
• Increased tolerances around the display as many have had issues with glass breakage.