Music Hue Forge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 250x250mm in size. Be sure to only scale X and Y as needed.  Z height must not change.
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 4.3mm and the Actual Depth is 2.7mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA+ Esun Orange Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Green Transmission Distance: 2
This print uses 7 unique filaments

Swap Instructions: 
    Start with Charcoal
    At layer #7 (0.92mm) swap to Marine Blue
    At layer #8 (1.04mm) swap to Blue
    At layer #10 (1.28mm) swap to Dark Red
    At layer #13 (1.64mm) swap to Orange
    At layer #15 (1.88mm) swap to Yellow
    At layer #17 (2.12mm) swap to Green
    At layer #19 (2.36mm) swap to Yellow for the rest.