Halloween Embrace

Project: halloween embrace.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Kingroon Red Transmission Distance: 4.4
PLA Kingroon Gray Transmission Distance: 2.1
PLA Kingroon Silver Transmission Distance: 0.4
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #13 (1.12mm) swap to Gray
At layer #16 (1.36mm) swap to Silver
At layer #23 (1.92mm) swap to White for the rest.