Ghost Boo Filament Painting (Hueforge)

Ghost Boo Filament Painting. Just in time for Halloween! Print profile includes an optional frame to print seperate from the filament painting. The painting should fit right inside the frame. Little trimming should be needed. Keep the Filament painting in place with a dab of super glue in the 4 corners press firmly into the frame. We prefer Loctite Ultragel control super glue, at this time.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x184.78mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA+ IIID Max Navy Blue Transmission Distance: 3.6
PLA+ IIID Max Orange Transmission Distance: 3.2
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA+ IIID Max Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Navy Blue
At layer #10 (0.88mm) swap to Orange
At layer #14 (1.2mm) swap to Sunrise Orange
At layer #20 (1.68mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.