lamp Bookmark

Materials Needed:

• 3D-printed lamp parts (2 parts per lamp)
• Strong adhesive (preferably suitable for plastic)
• Small brush or glue applicator (optional)
• sandpaper (optional)

Assembly Steps:

1. Preparation:
   • Ensure all 3D-printed parts are clean and dry.

   • optional use fine sandpaper to smooth the surfaces where the parts will be glued for better adhesion.

      

2. Apply Glue:

   • Apply a thin layer of glue to the surfaces where the lamp parts will connect. These are likely the areas where the lamp head attaches to the arm.

      

3. Join the Parts:
   • Carefully align the lamp head with the arm as shown in the image.

   • Press the parts together firmly, ensuring they are properly aligned.

      

4. Drying Time:
   • Allow the glued parts to dry according to the adhesive manufacturer’s instructions, ensuring they are held in place if needed.

Once dry, your 3D-printed lamp should be securely assembled! This one is now ready for use :)

 

Also check out our entire collection of book marks: collection 

Boost MeIf you want more of this models.
You can always leave a boost :)