One Piece - The SK Brook Wanted Poster

These One Piece wanted posters have a ton of texture and a light metallic shine to them!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 162.56x243mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Bambu Metal Oxide Green Transmission Distance: 0.4
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA Bambu Metal Copper Brown Transmission Distance: 0.5
PLA Bambu Basic Gold Transmission Distance: 2.8
PLA Zyltech Milky White Transmission Distance: 9.5
PLA Bambu Metal Iridium Gold Transmission Distance: 1
PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 8 unique filaments

Swap Instructions:
Start with Black
At layer #30 (1.4mm) swap to Oxide Green
At layer #31 (1.44mm) swap to Army Red
At layer #33 (1.52mm) swap to Copper Brown
At layer #44 (1.96mm) swap to Gold
At layer #47 (2.08mm) swap to Milky White
At layer #50 (2.2mm) swap to Gold
At layer #52 (2.28mm) swap to Iridium Gold
At layer #59 (2.56mm) swap to Gold
At layer #69 (2.96mm) swap to Cold White for the rest.