Halloween - Scene 1 - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x198.6mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Gray Transmission Distance: 2
• PLA BambuLab Basic Silver Transmission Distance: 0.5
• PLA BambuLab Basic Jade White Transmission Distance: 5
  

This print uses 4 unique filaments

Swap Instructions:

• Start with Black
• At layer #10 (0.88mm) swap to Gray
• At layer #16 (1.36mm) swap to Silver
• At layer #23 (1.92mm) swap to Jade White for the rest.

If you don't have Silver, you can use a darker gray and lighter gray in place of the gray and silver, respectively. I don't suggest using a PLA Silk Silver; just use a regular PLA Silver for best results.

If you scale the print, please do not scale the Z axis.