Minecraft

Project: creeper.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x174.75mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Default White Transmission Distance: 5
PLA Default White Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with White
At layer #4 (0.4mm) swap to White
At layer #5 (0.48mm) swap to Black
At layer #11 (0.96mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to White
At layer #25 (2.08mm) swap to BambuLab Green for the rest.