Carolina Tarheels Mascot

Boost MePlease boost if you enjoy our prints It helps us buy supplies and equipment.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Lemon Yellow Transmission Distance: 11
PLA+ Numakers Teal Blue Transmission Distance: 4.8
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #12 (1.04mm) swap to Teal Blue
At layer #19 (1.6mm) swap to Pitch Black
At layer #21 (1.76mm) swap to Lemon Yellow
At layer #23 (1.92mm) swap to Teal Blue
At layer #25 (2.08mm) swap to Pure White for the rest.