Minnie Mouse Christmas Ornament (PRINT IN PLACE)

Minnie Mouse Tree Ornament for Christmas!

A simple easy to print, no support required christmas tree decoration in the shape of Minnie!

Print time required: About 50 minutes on an Bambulab A1

Specific Settings:

I'm using a brim just to make sure it doesn't tip over when printing multiple but if you have good adhesion is probably not necessary, other than that you can play around with the ammount of infill to pick how heavy or light you want it to be, i stuck with 5% gyroid for a good balance

AMS Not Required But you can always use it to paint in any design/color layers that you want!

You do need a simple hook for christmas tree to hang it, unless your branch is thin enough.

EDIT:

I also published an optimized hook pack that goes great with the models!

https://makerworld.com/en/models/712985#profileId-643406

EDIT: NEW MULTICOLOR OPTION WITH NO AMS NEEDED.

I've added a non ams version which has the bow split from the main body that can be then press fit into the model, it has a bit of support which should be easy to remove on the bow but no waste from the ams.