Lava Drop Lamp

This designer lamp combines modern design with a soothing, warm glow, perfect for adding a touch of elegance and ambiance to any room.

You will need LED Lamp Kit 001 for this build. 

For assembly, you will also need the base from the original kit: https://makerworld.com/en/models/13717

All parts were designed to be printed without support. I added a brim for the frame for a higher success rate.

Note that not all materials will work equally good for the drop, some might be too transparent or not transparent enough. White, Yellow and Orange PLAs work best, some other colors might also look good but could be a little too dim. The lamp in the picture was printed with Bambu Lab Matte PLA, Black and Orange.

Assembly:

Assembly is pretty straight forward: First you need to replace the diffuser of the lamp kit. Simply unscrew the lamp, take the small diffusor out and replace it with the lava drop. If you have trouble getting the diffuser out, you can use a piece of tape to get better grip of it.

After that, you can assemble the lamp like the original kit.